Short answer: A product feed from RSS Feed Creator usually has fewer items than the store because some products are left out on purpose: those with no price, those with no image, and, while the option is on, those that are out of stock. Other causes are the product limit of your plan, a cap of 20 variants per Shopify product and CSV rows without a title or link. Count each group, fix the data in the store and the feed fills up at the next refresh.
A smaller feed is often a correct feed
When you first compare the number of products in the store with the number in the feed, a gap can feel like a bug. In most cases it is the tool protecting you. Google and Meta reject products without a price or a picture, and showing a sold-out product wastes clicks. RSS Feed Creator therefore applies a few simple filters before it writes the file, so the feed contains only items that channels can accept.
The aim of this guide is to turn the gap into an explanation. Every missing product has a reason, and the reasons are a short list. Once you know them, you can usually close the gap in an afternoon by improving the data in your store. The structure of the finished file is described in inside an RSS Feed Creator product feed.
Reason 1: no price
A product with an empty price, or a price of zero, is left out of the feed. This catches products that are still drafts in practice, “request a quote” items and products whose price is set only in a variant that the page does not show. For a CSV, it also applies to rows with an empty price cell.
One related trap is the format of the number. In a CSV, a price must be a plain number with a dot, such as 19.99. A price written with a decimal comma or with a currency symbol is not read as a number, so the item can reach the feed with an empty price, which channels reject. If a whole group of products is rejected for price reasons, look at how the price column is written, as explained in CSV link to product feed: the columns RSS Feed Creator reads.
If you are not sure which products have no price, sort the store’s product list by price and look at the top and the bottom. Items with an empty price or a zero price gather at one end, and you can correct them in one pass.
Reason 2: no image
A product without a main image is left out, because both Google and Meta need one. The picture is the first product image in WooCommerce and Shopify, or the image_link or image column in a CSV. Products that were imported without pictures, or whose pictures were deleted from the media library, are the usual victims.
Fixing it is simple but needs attention to detail: add a main image to each affected product. Check that the picture file is reachable by visitors, not only by logged-in users. Requirements for size and quality are in product feed image requirements for Google and Meta.
Reason 3: out of stock
A new product feed starts with the option “Skip out-of-stock products” switched on. Sold-out products, and for Shopify sold-out variants, are therefore left out. If a shop has a lot of items out of stock, for example during a seasonal gap, this can account for much of the difference. Switch the option off on the management page if you prefer to keep sold-out products in the feed with an out-of-stock status. Out-of-stock products in your feed: keep, mark or remove helps with that choice.
Seasonal shops feel this reason most. In January a garden shop may have half its range sold out, and the feed shrinks accordingly; in spring the products return and the feed grows by itself at the next refresh. That is the intended behaviour, and no one needs to edit the feed when stock changes.
Reason 4: the limit of your plan
Every plan caps how many products a feed can hold: up to 50 on the free plan, up to 2,000 on the Store plan and up to 20,000 on the Business plan. Items beyond the cap are not included, and the feed holds the first items in the order the store provides them. The cap counts feed items, so on Shopify each variant counts. A store with 30 products and four variants each has 120 items and exceeds the free limit.
If your item count on the management page sits exactly at the cap, assume the limit is the reason. The pricing page lists the numbers for each plan.
If you are close to a limit, remember that shopping channels work better with complete catalogues, because shoppers who see only part of your range see only part of your business. Pick the plan that holds the whole catalogue, counted with variants.
Reason 5: other, smaller causes
- Products not visible to visitors. The tool reads public data, so draft, private or hidden products are not available to it.
- Shopify products with many variants. Up to 20 variants per product are read.
- CSV rows without a title or a link. Both are required for a row to be read, and the header row must name the columns.
- A store that does not expose its data. If the store is not WooCommerce, Shopify or a CSV, or blocks public product data, the preview says that products could not be read.
- The feed was not refreshed yet. After you change data, the feed shows the old state until the next refresh, every 3 hours on the free plan and every 30 minutes on paid plans.
Find the cause with a simple count
You do not need to guess. Write down these numbers and see where the gap goes:
| Number | Where to find it |
|---|---|
| Published products (or variants) | Your store admin |
| Products found by the tool | The total in the preview |
| Items in the feed | The item count on the management page |
| Products without a price | A filter or export in the store |
| Products without an image | A filter or export in the store |
| Out-of-stock products | A stock filter in the store |
The preview counts what the tool found in the store, before the price, image and stock filters are applied. The feed count is after those filters. So the difference between the two is exactly the products left out for the reasons above, and if the sum of your counts for those groups matches the difference, you have your answer.
A worked example
A small WooCommerce shop has 140 published products. The preview on the free plan shows a total of 50, because that is the limit of the plan, and the management page later shows 34 items. The owner wants to know where 16 products went.
She filters her admin for products without a price and finds three. Products without an image: five. Products out of stock: eight. Three plus five plus eight is sixteen, which exactly explains the difference. She adds the prices and images, leaves the out-of-stock option on, saves the settings once and sees the count rise to 42 at the next update. The remaining gap to 140 is the plan limit, and she now knows that a larger catalogue needs the Store plan at €19 per month, which covers up to 2,000 products.
The whole investigation took twenty minutes, needed no technical knowledge and improved her store data for every channel, not only for the feed. That is the real value of the exercise: the feed shows you the weak spots in your catalogue.
Fix it at the source
The right place for most fixes is the store, not the feed. Add the missing prices and images, correct the CSV price format and decide on the out-of-stock option. Rules in the feed can reshape titles and adjust prices, but they cannot invent missing data, and feed rules vs fixing store data: where to make changes explains the division of labour. After you fix the data, wait for the next refresh or save the settings once on the management page, which starts an update at once.
When the numbers match your expectations, move on to the diagnostics in Merchant Center and Meta, using the product feed checklist: 25 checks before you submit as a guide.
Related reading
- Merchant Center Disapproved Products: Causes and Fixes
- Duplicate Products in Your Feed: IDs, GTINs and Cleanup
- Product Feed Health Metrics: What to Monitor Every Week
The bottom line
Missing products in an RSS Feed Creator feed have a short list of causes: no price, no image, out of stock, the plan limit and a few data problems. Compare the counts, find the group that explains the gap and fix it in your store. The feed follows at the next refresh.
DUK
Why does the preview show more products than the feed?
The preview counts the products found in the store, while the feed also leaves out products without a price or image and, if the option is on, those out of stock.
Can I include products without an image?
No. Both Google and Meta need a main image, so products without one are left out.
How do I keep out-of-stock products in the feed?
Untick “Skip out-of-stock products” on the management page and save.
Why is my feed stuck at exactly 50 items?
That is the limit of the free plan. The Store plan allows up to 2,000 products and the Business plan up to 20,000.
How quickly do fixes show up?
At the next refresh, or at once if you save the settings on the management page.


